Electric heating installation — Edinburgh & the Lothians

Modern electric radiators, underfloor heating and proper controls — for the flats, extensions and rural East Lothian homes where gas doesn't reach or doesn't earn its boiler.

Radiators from £349 + VAT each, fully installed · Underfloor priced per room · No wet plumbing, no boiler

SELECT member All work guaranteed Fully insured 20+ years' experience BS 7671:2018 (18th Edition) compliant

What would it cost to run?

Rough the numbers for one room with a modern electric radiator. Honest ranges, not sales maths.

ROUGHLY — A DAY IN THE HEATING SEASON

A 16 m² room typically needs a 1.5 kW radiator. With a thermostat it doesn't draw full power all the time — cycling puts a day at — on your rate, less in a well-insulated room, more in a draughty stone one.

Assumes ~100 W per m² of radiator output and a 40–60% thermostat duty cycle. Your tariff and insulation move these numbers; that's why they're ranges. Want to see where a house is losing heat first? Book a thermal heat-loss survey.

For homes: where electric heating actually makes sense

Electric heating isn't for every house — and we'll say so when it isn't. It earns its place where gas doesn't reach (plenty of rural East Lothian), in flats where a boiler and flue are impractical or the freeholder forbids them, in extensions and garden rooms where extending wet central heating costs more than it's worth, and in single rooms — the bathroom floor, the home office — where you want heat without touching the rest of the system.

Modern radiators are not storage heaters. The night-storage units still bolted to many Scottish walls charge up overnight and dump heat whether you're in or not. A modern electric radiator heats when you ask, holds the room at a set temperature with its own thermostat, and schedules per room from an app. If you're replacing storage heaters, the comfort difference is the point as much as the running cost.

Radiators from £349 + VAT each, fully installed — supplied, fitted, wired on a protected circuit and set up with you. Underfloor heating is priced per room.

Controls and zoning are where the money is. Because every electric radiator is its own zone, you heat the rooms you use at the hours you use them — no more heating three bedrooms to warm one kitchen. We set up the schedules with you at handover, and each circuit is properly protected and certificated like any other work we do.

For businesses and community buildings

Offices, shops, nurseries, village halls and churches often suit electric heating better than homes do: no boiler room, no flue, and heat only where and when the building is in use. Programmable radiators hold an office at temperature through the working day; infrared panels give instant heat in halls and churches that sit empty between bookings.

We size each space, put heating on properly protected circuits, and set up timers, thermostats or occupancy controls so you never pay to heat an empty room. Commercial jobs are priced after a survey.

Infrared heating — instant heat for halls and large spaces →

Great professional, reliable and friendly service! Installation of Rointe electric heaters throughout the house and removal of existing storage heaters. Would highly recommend VC Electrical.

Chris Elliot — Rointe heating installation

Electric heating questions, answered

Is electric heating cheaper than gas?

Per unit of heat, no — electricity costs more per kWh than gas, and anyone who tells you otherwise is selling something. Electric wins on the whole picture in the right house: no boiler to buy, service or replace, no standing gas charge, 100% efficiency at the radiator, and per-room control that stops you heating rooms you're not in. For a small flat or a home off the gas grid, the totals often favour electric; for a large gas-heated house, they usually don't.

What's the best system for a flat?

Usually modern electric radiators sized per room, with app scheduling — no flue, no annual gas safety visit, and each room controlled separately. Bathrooms suit electric underfloor under new tiling. If the flat still has storage heaters, swapping like-for-like positions keeps the install simple and cheap.

What are the running costs really like?

Use the estimator above for your room and rate — as a shape: a typical living room runs low single-digit pounds per day in the heating season, much less in spring and autumn. Insulation moves the number more than the radiator brand does. We give ranges because honest answers here are ranges.

How long does installation take?

A straight radiator swap is under an hour per unit; a whole flat is typically a day including circuits and controls. Underfloor heating fits in a day per room at the right stage of your renovation — before tiling or flooring goes down, so tell us early.

Can it all be controlled from my phone?

Yes — most modern electric radiators and underfloor thermostats schedule per room from an app, and many pair with smart tariffs so the heavy heating lands in cheap-rate hours. We set the schedules up with you at handover rather than leaving you with a manual.

Get a free estimate

Tell us the rooms, what's heating them now, and whether there's a renovation on — we'll price the system and the install as one figure.

Loading the enquiry form… If it doesn't appear, call 01620 843 804.

Prefer to talk it through? Call 01620 843 804.